Fresadora universal con cabezal giratorio-Fresadora universal con cabezal giratorio
X6332C
Integridad corporativa
| Spec. | unit | X6332C | |
| TABLE | Table size | mm | 1270x320 |
| T slot | no | 5 | |
| Size ( Width ) | mm | 14 | |
| Centre distance | mm | 70 | |
| Max. load of Table | kg | 300 | |
| TRAVEL | X table Longitudinal travel(manual/auto) | mm | 780 |
| Y table Cross travel (manual/auto) | mm | 300 | |
| Z table Vertical travel(manual/auto) | mm | 380 | |
| MAIN SPINDLE | Spindle taper | ISO40 | |
| spindle speed /step -- Vertical | rpm | 70-3620/10steps | |
| -- Horizontal | rpm | 60-1350/12steps | |
| Max.drilling dia. | mm | 30 | |
| Max.end milling width | mm | 125 | |
| Max. vertical milling Dia. | mm | 25 | |
| Max.tapping dia. | mm | 10(steel) | |
| quill travel | mm | 127 | |
| swivel angle of headstock | degree | ±45º | |
| vertical spindle axis to column surface | mm | 150-550 | |
| vertical spindle nose to table surface | mm | 150-500 | |
| horizontal spindle axis to table surface | mm | 0-350 | |
| horizontal spindle axis to arm bottom | mm | 190 | |
| arm travel | mm | 400 | |
| FEEDS | X /Y Longitudinal/cross feed | mm / min | 15-370/8steps |
| Vertical/step | mm/min | 575/1step | |
| X/Y Longitudinal/cross rapid speed | mm / min | 575 | |
| Z Rapid Traverse vertical | mm/min | 575 | |
| automatic spindle feed | rpm | 0.04/0.08/0.15 | |
| POWER | main motor | kw | 3.7(V), 2.2(H) |
| (X/Y/Z) feed motor | kw | 0.75(X/Y/Z) | |
| coolant motor | kw | 0.04 | |
| OTHERS | overall dimension | cm | 172x152x222 |
| N/W,G/W | kg | 1650/1850 | |
Localización actual：
