Integridad corporativa
Specification | CY6250L | CY6266L | CY6276L |
Swing over bed | 500mm | 660mm | 760mm |
Swing over cross slide | 300mm | 430mm | 530mm |
Swing in gap | 710mm | 870mm | 970mm |
Width of gap | 240mm | 240mm | 240mm |
Width of bed | 390mm | ||
Length of work piece (max) | 1000/1500/2000/3000/4000/5000mm (4000/5000mm only for CY61 series) | ||
Spindle nose | D8 | ||
Taper of spindle center | 1:20 | ||
Spindle bore diameter | 105MM | ||
Spindle speed | 6-1120rmp(24 steps) | ||
Max. output torque of spindle | 1500N.m | ||
Range of longitudinal feed | 0.063-6.43mm/rev(0.0025-0.25in/rev) | ||
Range of transverse feed | 0.027-2.73mm/rev(0.00106-0.107in/rev) | ||
Lead screw pitch | 12mm(metric system) 2TPI (inch system) | ||
Metric threads | 1-224mm(46 pitches) | ||
Inch threads | 28-1/8TPI (42 pitches) | ||
Module threads | 0.5-112mm(42 pitches) | ||
Diameter pitch threads | 56-1/4DP (45 pitches) | ||
Cross slide travel(max.) | 340mm | 360mm | |
Top slide travel (max.) | 150mm | 200mm | |
Section specification of tool post | 25x25mm | ||
Longitudinal rapid traveling speed | 4.5m/min (50HZ) 5.4m/min (60HZ) | ||
Transversal rapid traveling speed | 1.9mm/min(50HZ) 2.3m/min(60HZ) | ||
Morse taper of tailstock center | M5 | ||
Max. travel of tailstock quill | 150mm | ||
Tailstock quill diameter | 75mm | ||
Main motor | 11kw | ||
Rapid travel motor | 250w 1360rpm | ||
coolant pump motor | 90w 25L/min |