Universal Swivel Head Milling Machine-Universal Swivel Head Milling Machine
X6328B
Company general introduction-INTEGRITY
| Spec. | unit | X6328B | |
| TABLE | Table size | mm | 1120X260 |
| T slot | no | 3 | |
| Size ( Width ) | mm | 14 | |
| Centre distance | mm | 63 | |
| Max. load of Table | kg | 200 | |
| TRAVEL | X table Longitudinal travel(manual/auto) | mm | 600 |
| Y table Cross travel (manual/auto) | mm | 270 | |
| Z table Vertical travel(manual/auto) | mm | 300 | |
| MAIN SPINDLE | Spindle taper | ISO40 | |
| spindle speed /step -- Vertical | rpm | 65-4660/16 | |
| -- Horizontal | rpm | 38-1310/12steps | |
| Max.drilling dia. | mm | 30 | |
| Max.end milling width | mm | 100 | |
| Max. vertical milling Dia. | mm | 25 | |
| Max.tapping dia. | mm | M16 | |
| quill travel | mm | 127 | |
| swivel angle of headstock | degree | ±45º | |
| vertical spindle axis to column surface | mm | 200-760 | |
| vertical spindle nose to table surface | mm | 90-430 | |
| horizontal spindle axis to table surface | mm | 0-340 | |
| horizontal spindle axis to arm bottom | mm | 175 | |
| arm travel | mm | 500 | |
| FEEDS | X /Y Longitudinal/cross feed | mm / min | 24-402/9steps |
| Vertical/step | mm/min | 422/1step | |
| X/Y Longitudinal/cross rapid speed | mm / min | 402 | |
| Z Rapid Traverse vertical | mm/min | 422 | |
| automatic spindle feed | rpm | 0.45/0.86/125 | |
| POWER | main motor | kw | 2.2(V/H) |
| (X/Y/Z) feed motor | kw | 0.37(X/Y),0.75(Z) | |
| coolant motor | kw | 0.04 | |
| OTHERS | overall dimension | cm | 171X148X210 |
| N/W,G/W | kg | 1350/1500 | |
You are here：
