Heavy Duty Lathe-Heavy Duty Lathe
CW series lathe with 610mm bed width (CW60103C/CW62123C/CW62143C)
Company general introduction-INTEGRITY
| Item | Unit | Spec./Model | ||||||
| CW62103C | CW62123C | CW62143C | CW62163C | CW62183C | ||||
| Swing in bed | mm | 1030 | 1230 | 1430 | 1630 | 1830 | ||
| Swing in gap | mm | 1200 | 1400 | 1600 | 1800 | 2000 | ||
| Swing over cross slide | mm | 700 | 900 | 1100 | 1240 | 1440 | ||
| Distance between centers | mm | 1500/ 2000/ 3000/ 4500/ 6000 | ||||||
| Length in gap from face plate | mm | 380 | ||||||
| Spindle nose | C11 or D11 | |||||||
| Spindle bore | mm | 105,130 | ||||||
| Spindle speed | rpm/steps | 10-800/18 | 7-576/18 | 6-480/18 | ||||
| Cross slide travel | mm | 615 | 715 | 815 | 915 | |||
|
mm |
|
300 | |||||
| Rapid traverse | mm/min | Axe Z:3200,Axe X:1400 | ||||||
| Quill diameter | mm | 120 | ||||||
| Quill travel | mm | 270 | ||||||
| Quill taper | MT6 | |||||||
| Bed width | mm | 610 | ||||||
| Metric threads | mm/kinds | 1-240/53 | ||||||
| Inch threads | tpi/kinds | 30-2/31 | ||||||
| Module threads | mm/kinds | 0.25-60/42 | ||||||
| Diametral pitch threads | tpi/kinds | 60-0.5/47 | ||||||
| longitudinal feeds | mm/r | 0.07-16.72 | ||||||
| ain motor power | kw | 0.04-9.6 | ||||||
| Main motor power | kw | 11 | ||||||
You are here：
