Bench Lathe-Bench Lathe
CM6241
Company general introduction-INTEGRITY
| SPECIFICATION | MODELS |
| CM6241 | |
| CAPACITY | |
| Swing over bed | 410mm(16＂) |
| Swing over cross slide | 255mm(10＂) |
| Swing in gap | 580(23＂) |
| Length of gap | 190mm (7-1/2”) |
| Distance between centers | 1000mm(40＂) / 1500mm(60") |
| Center height | 205 (8”) |
| Width of bed | 250(10＂) |
| HEADSTOCK | |
| Spindle nose | D1-6 |
| Spindle bore | 52mm(2＂) |
| Taper of spindle bore | No.6Morse |
| Range of spindle speed | 16 changes 45-1800r/min |
| FEEDS AND THREADS | |
| Max.travel of compound rest | 140mm (5-1/2”) |
| Max.travel of cross slide | 210mm(8-1/4＂) |
| Leadscrew pichch | 4T.P.I. |
| Max. Section of tool | 20×20mm(13/16＂) |
| Longitudinal feeds range | 0.05-1.7mm/rev(0.002＂-0.067＂/rev) |
| Cross feeds range | 0.025-0.85mm(0.001＂-0.0335＂/rev) |
| Metric threads range | 39kinds 0.2-14mm |
| Threads imperial pitches | 45kinds 2-72T.P.I |
| Diametrical pitches range | 21kinds 8-44D.P. |
| Module pitches range | 18kinds 0.3-3.5M.P. |
| TAILSTOCK | |
| Dia.of tailstock sleeve | 50mm(2＂) |
| Travel of tailstock sleeve | 120mm(4-3/4＂) |
| Morse taper of tailstock sleeve | No.4 Morse |
| Cross adjustock | ±13mm(±1/2＂) |
| MOTOR | |
| Power of main motor | 2.2/3.3kw(3/4.5HP)3PH |
| Power of coolant pump | 0.1KW(1/8HP),3PH |
| DIMENSION AND WEIGHT | |
| Overall dimension(L×W×H) mm | 1940×850×1320 |
| Packing size(L×W×H)mm | 2060×900×1640 |
| Net weight/Gross weight | 1160/1350 |
You are here：
