CNC Machining Center-CNC Vertical Machining Center
VMC1060L
Company general introduction-INTEGRITY
| Item | Specification | Unit | VMC1060L |
| Work table | Table size | mm | 600*1300 |
| Max load | kg | 800 | |
| T-Slot size (number-width.pitch) |
mm | 5-18*100 | |
| Travel | X axis | mm | 1000 |
| Y axis | mm | 600 | |
| Z axis | mm | 600 | |
| Travel: Spindle nose to worktable distance | mm | 70-670 | |
| Travel: Spindle center to column block distance | mm | 655 | |
| Spindle | Spindle taper type/ installation size |
mm | BT40－ φ150 |
| Spindle speed range | r/min | 100-8000 Belt drive | |
| Spindle rating power | kw | 11 | |
| Max fast movement speed | X axis | m/min | 24 |
| Y axis | m/min | 24 | |
| Z axis | m/min | 18 | |
| Cutting feed speed | X, Y, Z axis | m/min | 0.005-10 |
| Lead screw spec | X, Y, Z axis | 4012 | |
| Guide way spec/type |
X, Y, Z axis | Linear guide，Linear guide，Hardway | |
| Positioning accuracy | X, Y, Z axis | 0.008 | |
| Repeat positioning accuracy | X axis | mm | 0.004 |
| Y axis | mm | 0.004 | |
| Z axis | mm | 0.005 | |
| Tool magazine | BT40-20T umbrella type | changing tool time(knife to knife) 10 sec(BT40) | |
| BT40-20T arm type | Changing tool time(knife to knife) 4 sec(BT40), 16 sec(servo type) | ||
| Max tool weight | 8KG(BT40) | ||
| Max BT40 tool diameter | mm | ￠75(all tool in) ￠120(adjacent vacant) | |
| Max tool length | mm | 300 | |
| X,Y,Z axis motor parameter:torque | Nm | 12,16,16 | |
| Bed block height | mm | 50 | |
| Machine protection | Full sealed protection | ||
| Power | KVA | 25KVA | |
| Pneumatic pressure | Mpa | 0.5-0.7 | |
| GW | T | 8.5 | |
| Dimension | MM | 3300*2600*2900 | |
You are here：
