Precision Lathe-Precision Lathe
CS series lathe with φ52mm spindle bore (CS6240/CS6250)
Company general introduction-INTEGRITY
| ITEM | UNIT | CS6140 | CS6240 | CS6150 | CS6250 | |
| Capacity | Max. swing dia. over bed | mm | Φ400 | Φ500 | ||
| Max. swing dia.in gap | mm | Φ630 | Φ710 | |||
| Max. swing dia. over slides | mm | Φ220 | Φ300 | |||
| Max. workpiece length | mm | 1000/1500/2000/3000 | ||||
| Spindle | Spindle bore diameter | mm | Φ52 | Φ52 | ||
| Type of spindle nose | ISO 702/II NO.6 bayonet type | |||||
| Spindle speed | rpm | 24 steps 9-1600 | 24 steps 9-1600 | |||
| Spindle motor power | kw | 7.5 | 7.5 | |||
| Tailstock | Diameter of quill | mm | Φ75 | Φ75 | ||
| Max. travel of quill | mm | 150 | 150 | |||
| Taper of quill (Morse) | MT | 5 | ||||
| Turret | Tool O.D. size | mm | 25X25 | 25X25 | ||
| Feed | Max. travel of upper toolpost | mm | 145 | 145 | ||
| Max. travel of lower toolpost | mm | 320 | 320 | |||
| X feed range | mm/r | 65 kinds 0.063-2.52 | 65 kinds 0.063-2.52 | |||
| Z feed range | mm/r | 65 kinds 0.027-1.07 | 65 kinds 0.027-1.07 | |||
| Metric threads | mm | 48 kinds 0.5-224 | 48 kinds 0.5-224 | |||
| Inch threads | t.p.i | 46 kinds 72-1/8 | 46 kinds 72-1/8 | |||
| Module threads | πmm | 42 kinds 0.5-112 | 42 kinds 0.5-112 | |||
| Diametric pitch threads | D.P. | 45 kinds 56-1/4 | 45 kinds 56-1/4 | |||
You are here：
