Company general introduction-INTEGRITY
Item | Specification | Unit | VMC850C |
Work table | Table size | mm | 530*1000 |
Max load | kg | 600 | |
T-Slot size (number-width.pitch) |
mm | 5-18*100 | |
Travel | X axis | mm | 800 |
Y axis | mm | 500 | |
Z axis | mm | 700 | |
Travel:Spindle nose to worktable distance | mm | 110-810 | |
Travel:Spindle center to column block distance | mm | 575 | |
Spindle | Spindle taper type/ installation size |
mm | BT40/ 150 |
Spindle speed range | r/min | 100-8000 Belt drive | |
Spindle rating power | kw | 7.5 | |
Max fast movement speed | X axis | m/min | 20 |
Y axis | m/min | 20 | |
Z axis | m/min | 18 | |
Cutting feed speed | X, Y, Z axis | m/min | 0.005-10 |
Lead screw spec | X, Y, Z axis | 4010 | |
Guide way spec/type |
X, Y, Z axis | Hardway,Hardway,Hardway | |
Positioning accuracy | X, Y, Z axis | mm | 0.01 |
Repeat positioning accuracy |
X axis | mm | 0.005 |
Y axis | mm | 0.005 | |
Z axis | mm | 0.005 | |
Tool magazine | BT40-20T umbrella type | changing tool time(knife to knife) 10 sec(BT40) | |
BT40-20T arm type | Changing tool time(knife to knife) 4 sec(BT40), 16 sec(servo type) | ||
Max tool weight | 8KG(BT40) | ||
Max BT40 tool diameter | mm | ¢75(all tool in) ¢120(adjacent vacant) | |
Max BT50 tool diameter | mm | - | |
Max tool length | mm | 300 | |
X,Y,Z axis motor parameter:torque | Nm | 10,12,12 | |
Bed block height | mm | 80 | |
Machine protection | Full sealed protection | ||
Power | KVA | 20KVA | |
Pneumatic pressure | Mpa | 0.5-0.7 | |
GW | T | 5.3 | |
Dimension | MM | 2700*2400*2700 |