Company general introduction-INTEGRITY
The machine tools are controlled by a variety of CNC system from which customers can select whatever they want.
The feed movement is realized ball screw and slide guide.
Adopts AC frequency-converter to shift the speed of the spindle motor.
Adopts collet chucks to clamp work-piece and it is the customer’s discretion to select manual or hydraulic operation.
Item | Unit | Specification | Remarks | |
Max. swing over bed | mm | 520 | ||
Max. swing over slide | mm | 315 | ||
Center distance | mm | 750/1000/1500 | ||
Effective processing length(chuck to point) | mm | 600/850/1350 | ||
Max.cutting diameter | Disc | mm | 500 | |
Axis | mm | 315 | ||
Travel of X axis | mm | 295 | ||
Travel of Z axis | mm | 750/1000/1500 | ||
X/Z Rapid feed speed | m/min | 4/8 | ||
Spindle speed range | rpm/min | Low speed:24-240, medium speed: 70.5-705 High speed: 250-2500 |
||
Spindle nose type | type | A2-8 | ||
Spindle through hole | mm | Ø87 | ||
Spindle front bearing inner diameter | mm | Ø120 | ||
Spindle inner hole taper | 1:20 | |||
Manual chuck(through hole) | mm | Ø250(Ø 80) | ||
Main motor power | kw | 7.5/11/15 variable frequency motor | Optional servo motor | |
Electric tool post | type | 4 | Optional 6 | |
Tool cross section | mm | 25x25 | ||
Tailstock quill diameter/travel | mm | Ø75/120 | ||
Tailstock quill | mm | MT-#5 |