Company general introduction-INTEGRITY
Spec. | unit | X6436 | |
Table | Table size | mm | 1320x360 |
T slot | no | 3 | |
Size ( Width ) | mm | 14 | |
Centre distance | mm | 95 | |
Max. load of Table | kg | 300 | |
Swivel of table | degree | ±35º | |
Machining range | table Longitudinal travel(manual/auto) | mm | 1000 |
table Cross travel (manual/auto) | mm | 290/280 | |
table Vertical travel(manual/auto) | mm | 400 | |
Main Spindle | Spindle taper | ISO50 | |
spindle speed /step -- Vertical | rpm | 58-1800/ | |
spindle speed /step -- Horizontal | rpm | 60-1750/ | |
swivel angle of swivel head | degree | 360º | |
vertical spindle axis to column surface | mm | 220-720 | |
vertical spindle nose to table surface | mm | 170-570 | |
horizontal spindle axis to table surface | mm | 0-400 | |
horizontal spindle axis to arm bottom | mm | 175 | |
arm travel | mm | 500 | |
Feeds | X /Y Longitudinal/cross feed | mm / min | 22-420(X), 22-393(Y) |
Z Vertical/step | mm/min | 10-168(Z) | |
X/Y Longitudinal/cross rapid speed | mm / min | 1290(X),1205(Y) | |
Z Rapid Traverse vertical | mm/min | 513(Z) | |
Power | main motor | kw | 4 |
(X/Y/Z) feed motor | kw | 1.1 | |
coolant motor | kw | 0.9 | |
Others | overall dimension | cm | 207x202.5x202 |
N/W,G/W | kg | 2480 |