Bench Lathe-Bench Lathe
GH-1440A
Company general introduction-INTEGRITY
| SPECIFICATION | UNIT | GH-1440A | |
| General capacity | Swing over bed | mm | Ф356 (14”) |
| Swing over carriage | mm | Ф210(8-5/8”) | |
| Swing over in gap | mm | Ф506 (20”) | |
| Width of bed | mm | 205 (8-1/8”) | |
| Distance between centers | mm | 1000 (40”) | |
| Main motor power | kw | 1.5/2.4 (3HP) | |
| Main spindle | Taper of spindle bore | MT | NO.5 |
| Diameter of spindle bore | mm | Ф38 (1-1/2”) | |
| Number of spindle speeds | 16 | ||
| Range of spindle speed | r/min | 45-1800 | |
| Spindle nose | D1-4 | ||
| Threading & feeding | Metric pitch threads | mm | 0.45-7.5 (22kinds) |
| Inch threads | T.P.I | 4-112 (40 kinds) | |
| Range of longitudinal feeds | mm | 0.03-0.688 (0.0011”-0.0271”) |
|
| Range of cross feeds | mm | 0.015-0.220 (0.0003"-0.01") |
|
| Tailstock | Travel of tailstock quill | mm | 120 (4-3/4”) |
| Diameter of tailstock quill | mm | Ф45 (1-25/32”) | |
| Taper hole of tailstock quill | MT | NO.3 | |
| Packing dimension | mm | 1900x760x1460 | |
| Net weight | Kg | 875 | |
| Gross weight | Kg | 960 | |
You are here：
