Company general introduction-INTEGRITY
ITEM | UNIT | SPECIFICATION | REMARK | ||
---|---|---|---|---|---|
WORK TABLE |
Table size | mm | 500*800 | ||
T-slot (number – width-pitch) | 3-18*144 | ||||
Distance between spindle nose to worktable | mm | 120~820 | |||
Max. loading weight | kg | 350 | |||
SPINDLE | Spindle taper type / installation size | BT40/Ф150 | |||
Max. spindle speed | r/min | 8000 | |||
Drive mode | Direct | ||||
Spindle motor | kw | 5.5 | |||
Distance between spindle center to column | mm | 560 | |||
TRAVEL | X / Y / Z axis | mm | 600 / 500 / 700 | ||
SCREW | Dia. Of X/Y//Z axis ball screw | mm | 40 | ||
GUIDEWAY | X/Y axis (linear way) |
Spec. | MSA35LA | ||
Torque of X/Y axis | Nm | 10 | |||
Servo motor of X/Y axis | kw | 1.8 | |||
Z axis (linear way) |
Spec. | MSA45LS | |||
Torque of Z axis | Nm | 20 | |||
Servo motor of Z axis | kw | 2.5 | |||
TOOL MAGAZINE |
24 pcs arm type | ||||
Max. tool diameter / length / weight | mm/mm/kg | 78/300/7 | |||
Max. tool diameter / length (adjacent vacant) | mm/mm | 150/300 | |||
Tool changing time | s | 3.5 | Knife to knife | ||
RAPID SPEED | Fast movement speed / cutting feed speed for X axis | m/min | 36/10 | ||
Fast movement speed / cutting feed speed for Y axis | m/min | 36/10 | |||
Fast movement speed / cutting feed speed for Z axis | m/min | 36/10 | |||
ACCURACY | Positioning accuracy for X/Y axis | mm | ≤0.008 | ||
Positioning accuracy for Z axis | mm | ≤0.008 | |||
Repeat Positioning accuracy for X/Y axis | mm | ≤0.004 | |||
Repeat Positioning accuracy for X/Y axis | mm | ≤0.004 | |||
Worktable weight load | kg | 350 | |||
WEIGHT | Machine weight | Kg | 4500 | About | |
DIMENSION | Overall dimension (LxWxH) | mm | 3000*2800*3000 |