Company general introduction-INTEGRITY
ITEM | UNIT | SPECIFICATION | REMARK | |||
---|---|---|---|---|---|---|
WORK TABLE |
Table size | mm | 420*700 | |||
T-slot (number – width-pitch) | 3-18*125 | |||||
Distance between spindle nose to worktable | mm | 170~590 | ||||
Max. loading weight | kg | 300 | ||||
SPINDLE | Spindle taper type / installation size | BT40/Ф120 | ||||
Max. spindle speed | r/min | 100-12000 | ||||
Spindle motor | kw | 5.5 | ||||
Distance between spindle center to column | mm | 456 | ||||
TRAVEL | X / Y / Z axis | mm | 600 / 400 / 420 | |||
SCREW | Lead screw spec | 3216 | ||||
GUIDEWAY | X/Y/Z axis (linear way) |
Spec. | 3-axis linear guide way | |||
Torque of X/Y axis | Nm | 12 | ||||
TOOL MAGAZINE |
Changing tool time | BT40-20t umbrella type | Sec. | 10 sec (BT40) | kinfe to knife | |
BT40-24T arm type | Sec. | 4 sec(BT40), 16 sec(servo type) | kinfe to knife | |||
Max. tool weight | kg | 8(BT40) | ||||
Max. BT40 tool diameter | mm | ¢75(all tool in)¢(adjacent vacant) | ||||
RAPID SPEED | Fast movement speed / cutting feed speed for X axis | X/Y/Z axis | m/min | 48/48/48 | ||
ACCURACY | Positioning accuracy for X/Y axis | mm | ≤0.008 | |||
Positioning accuracy for Z axis | mm | ≤0.008 | ||||
Repeat Positioning accuracy for X/Y axis | mm | ≤0.004 | ||||
Repeat Positioning accuracy for X/Y axis | mm | ≤0.004 | ||||
Worktable weight load | kg | 300 | ||||
POWER | Machine power | KVA | 18 | |||
PRESSURE | Pneumatic pressure | Mpa | 0.5-0.7 | |||
COVER | Machine protection | Full | ||||
WEIGHT | Machine weight | Kg | 4500 | About | ||
DIMENSION | Overall dimension (LxWxH) | mm | 2500*2100*2500 |