CNC Machining Center-CNC Vertical Machining Center
VMC1580
Company general introduction-INTEGRITY
| Item | Specification | Unit | VMC1580 |
| Work table | Table size | mm | 800*1700 |
| Max load | kg | 1500 | |
| T-Slot size (number-width.pitch) |
mm | 5-22*135 | |
| Travel | X axis | mm | 1500 |
| Y axis | mm | 800 | |
| Z axis | mm | 700 | |
| Travel: Spindle nose to worktable distance | mm | 170-870 | |
| Travel: Spindle center to column block distance | mm | 810 | |
| Spindle | Spindle taper type/ installation size |
mm | BT50－ ¢155 |
| Spindle speed range | r/min | 100-8000 rpm Belt drive | |
| Spindle rating power | kw | 15 | |
| Max fast movement speed | X axis | m/min | 18 |
| Y axis | m/min | 18 | |
| Z axis | m/min | 16 | |
| Lead screw spec | X, Y, Z axis | 6310、6310、5010 | |
| Guide way spec/type |
X, Y, Z axis | Hardway，Hardway，Hardway | |
| Positioning accuracy | X, Y, Z axis | 0.01 | |
| Repeat positioning accuracy | X axis | mm | 0.005 |
| Y axis | mm | 0.005 | |
| Z axis | mm | 0.005 | |
| Tool magazine | BT50-24T umbrella type | changing tool time(knife to knife) 11 sec(BT50) | |
| BT50-24T arm type | Changing tool time(knife to knife) 5.5 sec(BT50) | ||
| Max tool weight | 15KG(BT50) | ||
| Max BT50 tool diameter | mm | ￠110(all tool in) ￠180(adjacent vacant) | |
| Max tool length | mm | 300 | |
| X,Y,Z axis motor parameter:torque | Nm | 24,26,26 | |
| Bed block height | mm | 65 | |
| Machine protection | Full sealed protection | ||
| Power | KVA | 32 | |
| Pneumatic pressure | Mpa | 0.5-0.7 | |
| GW | T | 12.5 | |
| Dimension | MM | 4400*3300*3200 | |
You are here：
