Company general introduction-INTEGRITY
Item | Specification | Unit | VMC1370L |
Work table | Table size | mm | 710*1500 |
Max load | kg | 1000 | |
T-Slot size (number-width.pitch) |
mm | 5-18*135 | |
Travel | X axis | mm | 1300 |
Y axis | mm | 700 | |
Z axis | mm | 700 | |
Travel: Spindle nose to worktable distance | mm | 190-890 | |
Travel: Spindle center to column block distance | mm | 757 | |
Spindle | Spindle taper type/ installation size |
mm | BT50- ¢155 |
Spindle speed range | r/min | 100-8000 rpm Belt drive | |
Spindle rating power | kw | 11(option 15) | |
Max fast movement speed | X axis | m/min | 24 |
Y axis | m/min | 24 | |
Z axis | m/min | 18 | |
Cutting feed speed | X, Y, Z axis | m/min | 0.005-10 |
Lead screw spec | X, Y, Z axis | 5010 | |
Guide way spec/type |
X, Y, Z axis | Linear guide,Linear guide,Hardway | |
Positioning accuracy | X, Y, Z axis | 0.008 | |
Repeat positioning accuracy | X axis | mm | 0.004 |
Y axis | mm | 0.004 | |
Z axis | mm | 0.005 | |
Tool magazine | BT50-24T umbrella type | changing tool time(knife to knife) 11 sec(BT50) | |
BT50-24T arm type | Changing tool time(knife to knife) 5.5 sec(BT50) | ||
Max tool weight | 15KG(BT50) | ||
Max BT50 tool diameter | mm | ¢110(all tool in) ¢180(adjacent vacant) | |
Max tool length | mm | 300 | |
X,Y,Z axis motor parameter:torque | Nm | 16,16,20 | |
Bed block height | mm | 30 | |
Machine protection | Full sealed protection | ||
Power | KVA | 25KVA | |
Pneumatic pressure | Mpa | 0.5-0.7 | |
GW | T | 10.5 | |
Dimension | MM | 3900*3250*3150 |